Plastic Bottle Testing MachineThe project is: Mechanical properties: Tensile strength and elongation, tensile elastic modulus, bending strength, flexural elastic modulus, compressive strength, cantilever beam impact strength, simply supported beam impact strength, shear strength, tear strength, peeling strength, puncture performance, Shaw hardness, Luo hardness, ball indentation hardness, drop hammer impact, environmental stress cracking and so on.

Physical and chemical indicators: appearance, internal pressure damage, water pressure failure pressure, longitudinal shrinkage rate, toxic and harmful content, monomer residue, ph value, acid, hydrolysis acid, hydroxyl value, crosslinking degree, chlorine content and so on.

Electrical properties: Dielectric constant, dielectric loss factor, volume resistivity, surface resistivity, etc.

Thermal properties: Melting point, oxidation induction time, melt flow rate, thermal deformation temperature, Vika softening temperature, line expansion coefficient, oxygen index, thermal stability, softening point, etc.

Weatherability: Aging Testing (UV, Xenon lamps, carbon arc lamps, etc.), salt mist testing (neutral salt mist, acidic salt mist), liquid resistance testing (water resistance, acid resistance, alkali resistance, salt tolerance, organic solvents, oil resistance, etc.), thermal aging and so on.

Plastic Bottle Testing machine classification is more, according to the standard is also relatively miscellaneous, testing projects in the mechanical, electrical, thermal performance, physical and chemical indicators, weather resistance are involved, this article is only to do a general description, specific to the analysis of special test data, we should find professional third-party testing institutions to cooperate. The purpose of this article is to give you a detailed understanding of the classification of plastic products, testing items and which test criteria are based on. I hope you will be able to detect the corresponding products, you can have a purposeful detection.

Plastic Pipe testing items are: Physical properties: density, thickness, size, water absorption, toughness, etc.

Combustion performance: vertical combustion ignites temperature oxygen index horizontal burning Hot rod

Mechanical properties: Tensile strength, flexural strength, friction coefficient, creep performance, tear strength, shear properties, impact performance, compression performance, fatigue strength, fracture toughness, tensile properties, bending properties, electrical properties, wear resistance, low temperature performance, rebound performance, tear performance

Durability: Aging, salt mist test, pulse, life assessment

Applicability: thermal conductivity, corrosion resistance, low temperature resistance, hydraulic performance, insulation performance, moisture permeability, pulse performance

Thermal Performance Testing: Thermal deformation temperature, thermal decomposition temperature, Vika softening point, high and low temperature impact, vitrification transition temperature, melting temperature, thermal stability, dimensional thermal stability, load thermal deformation temperature, Martin heat resistance, total volume shrinkage, linear shrinkage, Vika softening point, linear thermal expansion rate, fluidity, melting points, softening point, Melt flow rate, thermal conductivity, vitrification transition temperature, brittle temperature, loss of strength temperature.